iCarsoft MB V3.0 Diagnostic Scan Tool For Mercedes-Benz Sprinter Smart

MB V3.0 for Mercedes-Benz/Sprinter/Smart

• Diagnose Single Brand of most Models (OBDII-16DLC)
• Steering Angle Sensor (SAS) Calibration
• Full System Diagnosis
• Auto Identify Technology
• Actuation Test / Bi-directory Test
• Read &Clear DTC
• Supports Freeze Frame of Fault Code functions
• Read Live Data
• Support Oil Service Reset
• Support Battery Test
• Electronic Parking Brake (EPB) system maintenance
• Support Data Review and Print
• Supports Fuel Pump Activation
• Full Speed Upgrade via PC
• Supports A/F Setting
• 4.0″ TFT LCD, 480*320 Pixels
• Diesel Particulate Filter (DPF) Regeneration Control System
• Support Multi-Language
• Electronic Throttle Control System (ETC)

• iCarsoft MB V3.0.can do it all-reads and clears trouble codes on most of the systems such as engine, transmission, ABS and airbag etc.
• Support OBDII/EOBD ten modes of operation.
• Full ECU Diagnosis.
• Applies to the single brand of most of the models which equipment with OBDII-16DLC.
• Easy to use with silicone keys.
• Display live data in text, graph & analog for easy data review.
• Auto VIN technology can automatically identify model and year information in no time.
• Actuation Test / Bi-directory Test is used to access vehicle-specific subsystem and component tests.
• Support freeze frame of fault code functions.
• Oil Light/Service Reset: Support service lamp reset, reset service mileage and service intervals.
• Electronic Parking Brake (EPB): System maintenance deactivates and reactivates the EPB system for replacement and initialization.
• Fuel Pump activation function, activate it when replace a new one.
• Air Filter Self-learning process after replacing the air filter.
• Diesel Particulate Filter (DPF): Regeneration control system, requests the DPF regeneration process while DPF blockage and turn off the DPF indicator.
• Electronic Throttle Control system (ETC): Relearns the throttle valve control value while clear or replaces the throttle value.
• Steering Angle Sensor (SAS) calibration: Calibrates the steering wheel to straight ahead, or recalibrates SAS while steering part replacement.
• ABS Bleeding: Release the air to restore ABS brake sensitivity, or relearn while ABS replaced.
• Injector coding: Relearn the injector control parameter while the injector renewed or replaced.
• BCM (Body stability), this function supports routine maintenance of DSC modules, for example, reset or delete the adaptation values, start-up the unit.
• ECM (Engine), this function supports routine maintenance of engine modules, for example, reset or delete the adaptation values, calculate fuel consumption.
• TCM (Tans adaption), this function supports routine maintenance of transmission modules, for example, reset adaptation values, adjust the oil level.
• Air Suspension: Try reset electronic suspension air ride with the message system close all doors flip through message system go to suspension reset or off.
• Support TPMS programming service: It allows you to look up the tire sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.
• ACS (Air Conditioner), this function supports routine maintenance of air condition modules, for example, air conditioning system adaption reset, rese air conditioning compressor, run in air conditioning compressor, stepper motor initialization.
• Head Lamp is about the headlamp maintenance, maintenance and other related operations (Including AFS setting), and then perform this function for calibration.
• Seat, after repairing or replacing the window lift moto, it is necessary to perform relevant functions for calibration.
• The Print Data function allows you printing out the diagnostic data recorded by the scan tool or customized test reports.
• Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.
• DTC library to look up when user is operating this tool.
• Upgrade via Computer.
• Multi-language: English, German, Dutch, Spanish, French. (More languages will be added in the future.)