Performance Series 2400 Watt 3-Channel Amplifier Fusion PF-8003D Bass Boost Class-D Speaker + Subwoofer

2400 Watt 3-Channel Amplifier

The Performance Amplifier Series boasts a stunning metallic finish with diamond cut trim and contoured end plate covers, showcasing unparalleled design treatments; and this is only the beginning.

We've introduced a new concept to the range, a removable insert panel for those who want to show off a truly unique installation. Remove, replace, design and create your own work of art, your FUSION Performance amplifier is the ultimate blank canvas.

Good looks aside; the Performance amplifier series delivers high efficiency raw power to any car stereo system, this 3 channel Class-D amplifier delivers a massive 2400 Watts of power to your systems veins and with this much performance pumping be prepared to turn heads wherever you go.

Equipped with maximum current heavy-duty connector blocks, high* and low level input connections as well as OEM compatibility for owners of current model VW and Audi vehicles. 4-Way Protection: thermal, reversed polarity, DC offset and low voltage protection is engineered into the Performance series for prolonged and piercing power.

FUSION has proven yet again that power and performance can be affordable and fun.

Recommended Remote Bass Controller CA-RLC13 (Sold Separately)

Mounting Dimensions

• Height 51mm (2")
• Length 306mm (12")
• Width 200mm (7-7/8")

Product Specifications

• Amplifier Type Class-D
• Bass Boost @ 45Hz 0 - +18dB
• Damping Factor Greater than 200
• Frequency Response 10Hz - 20kHz
• High and Low Pass Crossover 12dB per Octave
• High Level Input Range 1 Volt to 30 Volts
• Low Level Input Range 0.35 Volts to 10 Volts
• Low Pass Cross Over Range 50Hz - 250Hz
• Minimum load impedance 2 Ohm
• Number of Channels 3
• Operating Voltage 10.5 - 16 Volts
• Power (Watts) 2400
• Power Requirements 12V DC (Negative Ground)
• Recommended Minimum Power/Ground 4 Gauge (AWG) Cable
• RMS Power Output @ 14.4V 1% THD+N Front 90W x2 @ 4 Ohm, 150W x 2 @ 2 Ohm
• RMS Power Output @ 14.4V 1% THD+N Sub 235W x 1 @ 4 Ohm, 400W x 1 @ 2 Ohm
• Signal to Noise Ratio >50dB
• Subsonic Crossover Range 10Hz - 40Hz
• Subsonic Filter 12dB per Octave