Christmas cut off: The Christmas delivery cut-off date has passed. Delivery before Christmas is not guaranteed. For the best chance of receiving your order in time, please select Express shipping.
Please be advised that our website will undergo maintenance at 5:00 PM. We expect to be back online by 7:00 PM. During this time, the website may not function at full capacity.
Christmas cut off: The Christmas delivery cut-off date has passed. Delivery before Christmas is not guaranteed. For the best chance of receiving your order in time, please select Express shipping.
Please be advised that our website will undergo maintenance at 5:00 PM. We expect to be back online by 7:00 PM. During this time, the website may not function at full capacity.
Currently Browsing
Fusion EN-3004 4-Channel 1800W Amplifier
Encounter Series 1800 Watt 4-Channel Amplifier
Flexible installation solutions
High and low level input connections requires CA-HIC13
Discrete install end caps
Covers and protects amplifier controls and cable connections.
4-way protection circuit
Thermal / reversed power polarity / dc offset and low voltage protection.
Heavy duty connector block
Supports maximum current supply.
Integrated cooling fan
Regulates temperature for sustained performance
Remote bass ready
Compatible with the CA-RLC13 bass remote (sold separately)
| Amplifier Type | Class-AB |
| Bass Boost @ 45Hz | 0 - +18dB |
| Crossover Range | 50Hz - 400Hz |
| Damping Factor | Greater than 200 |
| Frequency Response | 20Hz - 20kHz |
| High and Low Pass Crossover | 12dB per Octave |
| High Level Input Range | 1 Volt to 30 Volts |
| Low Level Input Range | 0.35 Volts to 10 Volts |
| Minimum load impedance | 2 Ohm stereo and 4 Ohm bridged |
| Number of Channels | 4 |
| Operating Voltage | 10.5 - 16 Volts |
| Power (Watts) | 1800 |
| Power Requirements | 12V DC (Negative Ground) |
| Recommended Minimum Power/Ground | 4 Gauge (AWG) Cable |
| RMS Power Output @ 14.4V 1% THD+N | 60W x 4 (@ 4 Ohm) |
| RMS Power Output @ 14.4V 1% THD+N | 75W x 4 (@ 2 Ohm) |
| RMS Power Output @ 14.4V 1% THD+N | 150W x 2 (@4 Ohm Bridged) |
| Signal to Noise Ratio | >50dB |
| Dimension (HxLxW) | 51 x 336 x 200mm |





