Christmas cut off: The Christmas delivery cut-off date has passed. Delivery before Christmas is not guaranteed. For the best chance of receiving your order in time, please select Express shipping.
Please be advised that our website will undergo maintenance at 5:00 PM. We expect to be back online by 7:00 PM. During this time, the website may not function at full capacity.
Our last trading day before the holidays is 20th December, and we will reopen on 13th January.
Christmas cut off: The Christmas delivery cut-off date has passed. Delivery before Christmas is not guaranteed. For the best chance of receiving your order in time, please select Express shipping.
Please be advised that our website will undergo maintenance at 5:00 PM. We expect to be back online by 7:00 PM. During this time, the website may not function at full capacity.
Our last trading day before the holidays is 20th December, and we will reopen on 13th January.
Christmas cut off: The Christmas delivery cut-off date has passed. Delivery before Christmas is not guaranteed. For the best chance of receiving your order in time, please select Express shipping.
Please be advised that our website will undergo maintenance at 5:00 PM. We expect to be back online by 7:00 PM. During this time, the website may not function at full capacity.
Our last trading day before the holidays is 20th December, and we will reopen on 13th January.
Currently Browsing
Fusion EN-3001 Monoblock 1200W Amplifier
EAN: 9419523301807 SKU: EN-3001
SHOWROOM NOW OPEN
Visit us at 3/229 Robinsons Road, Ravenhall, VIC
Encounter Series 1200 Watt Monoblock Amplifier Fusion EN-3001
Flexible installation solutions
High and low level input connections requires CA-HIC13
Discrete install end caps
Covers and protects amplifier controls and cable connections.
4-way protection circuit
Thermal / reversed power polarity / dc offset and low voltage protection.
Heavy duty connector block
Supports maximum current supply.
Integrated cooling fan
Regulates temperature for sustained performance
Remote bass ready
Compatible with the CA-RLC13 bass remote (sold separately)
| Amplifier Type | Class-AB |
| Bass Boost @ 45Hz | 0 - +18dB |
| Damping Factor | Greater than 200 |
| Frequency Response | 20Hz - 400Hz |
| High and Low Pass Crossover | 12dB per Octave |
| High Level Input Range | 1 Volt to 30 Volts |
| Low Level Input Range | 0.35 Volts to 10 Volts |
| Low Pass Cross Over Range | 50Hz - 400Hz |
| Minimum load impedance | 2 Ohm |
| Number of Channels | 1 |
| Operating Voltage | 10.5 - 16 Volts |
| Power (Watts) | 1200 |
| Power Requirements | 12V DC (Negative Ground) |
| Recommended Minimum Power/Ground | 4 Gauge (AWG) Cable |
| RMS Power Output @ 14.4V 1% THD+N | 200W x 1 (@4 Ohm) |
| RMS Power Output @ 14.4V 1% THD+N | 300W x 1 (@ 2 Ohm) |
| Signal to Noise Ratio | >50dB |
| Subsonic Crossover Range | 10Hz - 40Hz |
| Subsonic Filter | 12dB per Octave |
| Dimension (HxLxW) | 51 x 336 x 200mm |
